Item consists of a Kodascope Junior Film Splicing Outfit for 8mm and 16mm film. Included are directions for splicing film, a brush, an applicator, a can of film cement, a jar of film cement, an empty jar, screws and splicer in a black and silver box.
Item consists of a Cine-Kodak Duo Spicer Outfit complete with film cement, containers, an envelope of mounting screws and strips of practice film, and splicer. Missing applicators. For 8mm and 16mm movies, buth sound and silent.
Item consists of a roll of Eastman Plus-X Reversal Safety Film for 16mm cameras in original packaging. It is in a black metal canister sealed with black fabric tape.
Item is a roll of 100 ISO 24 exposure 35 mm photographic colour negative film. C-41 process. Kodacolor Gold 100 was introduced as Kodacolor VR-G 100 in 1986.
Item is a roll casing from 125 ISO 36 exposure 35 mm photographic black-and-white negative film (film has been removed). Plus-X Pan was produced form 1954-2001.
Roll casing from 25 ISO 36 exposure 35 mm photographic colour reversal film (film has been removed). K-12 process. Kodachrome II 25 135 was produced form 1961-1974
Item is a roll casing from 25 ISO 36 exposure 35 mm photographic colour reversal film (film has been removed). K-14 process. Kodachrome 25 135 was produced form 1974-2001
item is a roll casing from 64 ISO 36 exposure 35 mm photographic colour reversal film (film has been removed). K-14 process. Kodachrome 64 135 was produced form 1974-2009
Item is a roll casing from 64 ISO 36 exposure 35 mm photographic colour reversal film (film has been removed). E6 process. Ektachrome was used by National Geographic for low light situations where Kodachrome was not sensitive enough. The E6 process film was introduced in 1977.
Package of 5 rolls of 400 ISO, new in box black-and-white 36 exposure 35 mm photographic negative film that was designed to be processed with C41 colour processing and printed on colour photograhpic paper.
Item is a set of colour pigments, produced by the Eastman Kodak Company and used to touch up colour prints and transparencies. The set contains 10 pigments; green, cyan, blue, magenta, red, yellow, orange, brown, neutral and reducer.
Item consists of a Kodak Reflection-Transmission Color Densitometer Model RT. When using the transmission mode, the densitometer can be used to measure the density of a negative, and when using the reflection mode, it can measure the saturation of a resulting print. This allows for a photographer to choose the correct paper and exposure to make prints with, without the need to experiment with test strips.
Item consists of an Eastman Studio Scale. It has a wooden base, a 6 piece weight set and a plaque that reads Avoirdupois Weight. It was used to facilitate the mixing of chemicals in a photographer's dark room.
Item is a filter kit used during analog printing of colour photographs. Printer looked through each filter at the print to determine what alterations to make in the colour filtration of the enlarger to create the corect colour balance.
Item consists of One Pair Kodak Handy Reflectors ...And One Handy Measure for Picture Making at Night. Included in a yellow and green paper envelope with black text are 2 foldable reflecting cones, 2 metal rings, and ABC intruction cards.
Item consists of a Kodak Floasholder Extension Unit Model B. It is in its original packaging, containing flash holder, clamp, plastic guard, and two 2-way flashguard envelopes.
Item consists of a Kodak B-C Flasholder. It features a 22.5-volt battery-condenser system for dependable flash synchronization and can be used with most flash-synchronized cameras, such as the Brownie Six-20 models.
Item is a small metal timer for taking photographs without having to be near the camera to release the shutter. A cable release is placed into the top of the device, with a plunger that is pushed down realizing the shutter when it pops back up.
Item is an Infrared remote control (two pieces, transmiter and receiver) for Ektagraphic slide projectors. These units operates the advance/reverse focus functions function of the projector. Wireless receiver is connected to projector via the wired remote jack. The item comes with original box.
Item is an auto-release shutter mechanism for still cameras, which allowed one to take self pictures. By hooking the shoulder of the cable shutter release from the camera into the extended spring clip, an additional 10 second period was available to take the picture after pushing up the release lever. Instructions are attached.