This camera has the unusual feature, for a non-folding camera, of both eye-level and waist-level viewfinders. The focussing lens has three aperture stops and both viewfinders shows brightline framing marks for 'Superslide' format. Flash facility is provided by the 'Pin & Screw' contacts on the left-hand side of the body, Kodak Supermite flasholder attached. Uses 620 rollfilm.

Item is a No. 1A Pocket Kodak. It is a medium sized camera with black leather casing, metal clasps, and Kodex No. 1 shutter (manufactured by Eastman Kodak Company, the rest of the camera body was produced by the Canadian branch), that made 2 1/2 x 4 1/4 inch exposures on 116 film. The A indicates that the camera is an Autographic version that allowed the photographer to add written information to the film.

Item is a Cine-Kodak Model B, the follow-up model of the Cine-Kodak which was the first 16mm camera. It has a cast aluminum body, hand crank and spring motor. The use of a tripod was required to allow varying speeds and single frames to be taken.

Item is a hand-held key-wound camera with black body and handle. Handle is also the range viewfinder. With tripod mount. 16mm movie camera. More research has shown dates between 1945-1950.

Introduced by Kodak in 1971, XL (eXisting Light) was incorporated with Super 8 to use their new High Speed Ektachrome Super 8 colour film and was designed to be able to film in as low light conditions as possible. The lens aperture is F1.2 compared to the super 8 normal of F1.8 and the film intermittent mechanism film pulldown speed was increased to allow a shutter open angle of 230 degrees compared to a typical 160 degrees previously. No light was diverted away from the film for a reflex viewfinder or TTL metering. The Kodak XL cameras had a unique "binocular" shape allowing easy two handed shooting.

Item consists of an opened carton of one dozen Kodak Cut Film Sheaths, 3 1/4 x 4 1/4 inches, manufactured for use in glass plate holders.