Item is made of green plastic with a slit for a small stereoscopic slide. Reads "Pixie Viewer. Steven's Mfg. Co. Herman Mo."

Item is metal stereoscopic viewer. Has the name magicoal fires on the front. Has two lenses

Item is large, cast metal, electric table projector for 4 x 10.16 cm stereo slides, such as those created with the Nimslo half frame or Kodak Realist 5 perf format. Produced by the Three Dimension Company (a division of Bell & Howell), the projector uses 2 500 watt bulbs.

This item is black a 35mm stereo camera with f3.5 lenses and seperate detachable flash.

Item is a plastic three-dimensional stereo camera with binocular viewfinder. This item makes 4 stereo pairs or 8 single images, exposure is 4.5 x 5 cm on 127 mm roll film. The single shutter-speed is 1/50, twin f11 meniscus fixed-focus lenses, lenses are separated by 53 mm. Instructions on how to use the camera on labelled on the back of the object by manufacturer. Item has simple uncoated lenses with flash contacts on the right side.

This item is a plastic and metal stereo camera manufactured by Haneel Camera Tri Vision. Camera is able to take three-dimensional and single images. Comes with Lestra-Lite color corrected lens. Features include snap back cover,internal spool to load film. The winding knob on top of the camera turns and secures film. Each camera takes 6 sets of nearly identical pictures on a roll of film. Left (L), Centre (C), and Right (R) are written on the back of the object above three small red windows. L, C, and R are designed to prevent double exposures on film. To take a single image, the lens cap is placed over the left hand lens, then shot, turn the spool, cover the the right hand lens with the lens cap and shot again. The three adjustments on the aperture are marked small F:16, medium F:11 and large F:8.

Item is a twin lens reflex (TLR) camera. Body is very similar to the Rolleiflex. 6x6 cm on 120 mm. Aut-stop winding, yashinon f3.5/80mm lens, copal-MXV, B 1 sec 1/500 shutter. Item also comes with a brown case and strap, written on case "Yashica-Mat."

Item is a double lensed camera with retractable front. View finder is outside the body of the camera. Comes in a leather covered wood body. Folding-bed collapsible bellows view. Wide front lens board, Wollensak lenses, automatic double valve stereo shutter.

Item consists of a colour transparency stereograph depicts a lake with mountains in the background.

1 photo album, with a tan/gold cover. Images focus on people/families, nature and locations

1 photo album, with a green cover. Stereocards depict people suffering from ailments, often medical, and attempts to heal them ie. pulling a tooth, boredom, a sore foot

Section I, II, & III
Contains stereograph x-rays of the alimentary or digestive tract and reveals common issues

Volumes list all the stereocards in a series and then describe each card, including the significance of the depiction. Certain volumes are accompanied by maps and plans.
Real Children in Many Lands
Italy: Through the Stereoscope
Norway: Through the Stereoscope
Russia: Through the Stereoscope
The United States: Through the Stereoscope
Traveling in the Holy Land: Through the Stereoscope(Have 3 of this title)
Palestine: Through the Stereoscope
Jerusalem: Through the Stereoscope
Part I - A Trip to Jerusalem: Through the Stereoscope

List contains a record of all the titles of the stereocards in the "600 set." Contains images from all over the world. Comes with an identifying note.

List records the identifying numbers of stereograph cards, the subject and then their location. 1 page is single sided and the second is double sided.

Item consists of a set of wheel type stereographs that depict underwater sea creatures including sharks, fish, worms, coral, and turtles. Packet No. B 612. Also includes a 16 page color illustrated booklet.

Item consists of wheel type stereographs that depict animals divided by geographic location (Wheel 1: South America and Asia, Wheel 2: Australia and Africa, Wheel 3: Africa and North America). The subjects of the pictures are listed on the back of the envelope. Also comes with a 16-page colour illustrated booklet

Item is a handheld stereoscope made of wood, metal and fabric. Viewer is adjusted by fabric between lenses. This item is a nontraditional stereoscope model, lacking a hood or sliding card holder. This stereoscope is patented by A.H. Baird, Edinburgh .

Item is a hand-held wooden viewer, base and handle attached to a metal accordion fold. Handle is able to bend back onto viewer. This sterescope was built with a card holder and hood to protect eyes from additional light that could disrupt the image

Item is a handheld plastic view master containing a reel of 7 diametrical, 16 mm colour transparencies of Old Covered Bridges, New England. It was manufactured by GAF, Corporation in Portland, Oregon, USA. The lever on the side of the viewer will rotate the reel one frame at a time once pressed. Item is made of plastic and metal. Reels are interchangeable and come with a variety of themes.

This item contains a battery operated talking view master in its original box and comes with forms for a power wand attachment and to order more viewmaster wheels. This object was designed as both an educational tool and a toy for children. The lever on the side of the viewer will rotate the reel one frame at a time once pressed. Item includes a push down soundbar and speaker grill on the front and back. This object only accepts reels that have soundtracks built in them. When soundbar is pushed, the record plays and narrates the image on view.

Item is an olive electric view master projector manufactured by Swayer's Inc. Originally this item was meant as an educational tool for adults but quickly became a popular children's toy. The lever on the side of the viewer will rotate the reel one frame at a time once pressed. Item is meant to project reel images on flat white screen

This item is a plastic black stereo adaptor designed for Robins Industries Corporation's J-33 and J-66 Polaroid cameras. This object also contains the "2 for 1" film saver device. Item comes in its original box with its original manual. Item was intended to capture two identical images from a Robins Polaroid camera to be viewed through the stereo adaptor and create the impression of a three-dimensional image.

This item is a hand held Holmes style stereoscope. This item is entirely made of wood and has a binocular-like viewer. Handle folds back onto viewer. This object was used to view two nearly identical photographs, or stereographs, as one three dimensional image. The stereograph would be placed in the sliding card holder and adjusted to fit the user's vision until the two images overlap to mimic a three-dimensional effect.

Item is a mahogany table top viewer adorned with doric style pillars. Item has two binocular style viewers on opposing ends. The optical rear eyepiece allows for back to back slide mountings. Inside the object is a revolving metal belt that can be turned by the circular handle on the outside of the viewer. The revolving belt can hold a minimum of 30 stereographs. Within the viewer are 10 stereographs made of glass, tissue and paper with themes ranging from landmarks, landscapes, portraits, and interior decor. Written on item: Alex Beckers New York Patent April 7 1857; March 1 & 29 1859; April 12 1859; Dec. 12 1859.

Item is a wooden hand-held stereoscope with an ornate details around the viewer hood. Handle folds down onto viewer. This object was used to view two nearly identical photographs, or stereographs, as one three dimensional image. The stereograph would be placed in the sliding card holder and adjusted to fit the user's vision until the two images overlap to mimic a three-dimensional effect.

Item is a upright wooden box made to house stereographs. There are three slots in the box with 30 stereographs of Palestine ca. 1899 inside. Images were produced by several different stereo studios such as Underwood & Underwood and Keystone View Company. The stereoscope is made out of wood with a metal hood covering the viewer from additional light.This object was used to view two nearly identical photographs, or stereographs, as one three dimensional image. The stereograph would be placed in the sliding card holder and adjusted to fit the user's vision until the two images overlap to mimic a three-dimensional effect.

Item is a wooden tabletop stereoscope with binocular viewer made with 50 built in glass stereographs of landscapes from Quebec and Montreal, factories and vernacular photography. Top of the stereoscope can open for additional light. Inside the object is a revolving metal belt (patented by Alexander Beckers) holding the stereographs that can be turned by the circular handles on the outside of the viewer.

Written on object: 76/Unis-France Stereoscopes Mattey-Paris/3.

Item is a handheld wooden stereoscope viewer. Card slide can bend to become more compact. This object was used to view two nearly identical photographs, or stereographs, as one three dimensional image. The stereograph would be placed in the sliding card holder and adjusted to fit the user's vision until the two images overlap to mimic a three-dimensional effect.

Item is a wooden pedestal Holmes style stereoscope. Hood of stereoscope is made of cardboard and adorned with a golden leaf pattern around the edges. Graphoscope is a viewing device used to enlarge photographs and text. Item is a made of a magnifying glass in a wooden frame and can collapse into a compact form.This object was used to view two nearly identical photographs, or stereographs, as one three dimensional image. The stereograph would be placed in the card holder and adjusted to fit the user's vision until the two images overlap to mimic a three-dimensional effect. This object can collapse into a compact form.

This item is a miniature wood and plastic combination viewer and stereoscope. Item has two parts that can elevate the viewer and stereoscope to a preferred view. Graphoscope is a viewing device used to enlarge photographs and text. Item is a made of a magnifying glass in a wooden frame and can collapse into a compact form. Whereas the stereograph was used to view two nearly identical photographs, or stereographs, as one three dimensional image. The stereograph would be placed in the sliding card holder and adjusted to fit the user's vision until the two images overlap to mimic a three-dimensional effect.

This item is an optical drawing device. It was designed to trace images appearing in the reflection of the mirrors. There are two slots on either part of the device to hold templates. The mirror swings back and forth beneath the stand to ensure a better view of the templates. Item comes with original manual titled "When And How To Use The Cheiroscope In Visual Training By Dr. Lee H. Jalonack O.D.F.D.S.F"

Item is a wooden hand held Holmes style stereoscope. Handle is able to bend back onto the viewer. This object was used to view two nearly identical photographs, or stereographs, as one three dimensional image. The stereograph would be placed in the sliding card holder and adjusted to fit the user's vision until the two images have overlapped to mimic a three-dimensional effect.

Written on object : Underwood & Underwood New York. Written in viewer hood : Pat. Applied For.

Item is a wooden tabletop revolving stereoscope. Handles on sides of the object turn a internal central axle built to rotate stereographs. Stereograph slots come with a clip that holds two stereographs back to back. Double viewer is hooded to control additional light and moves to adjust view.

This item is a grey and red metal personal viewer with a built in light source to illuminate backs of colour transparencies. Viewer can be adjusted by either knob on the sides or top. The push leaver on the side rotates the images within the reel.

Item is a handheld stereoscopic viewer made entirely of wood. Item comes with a sliding card holder and handle folds back onto viewer. This object was used to view two nearly identical photographs, or stereographs, as one three dimensional image. The stereograph would be placed in the sliding card holder and adjusted to fit the user's vision until the two images have overlapped to mimic a three-dimensional effect.

Item is a handheld stereoscope made from dark wood. Viewer hood is covered in a black suede. Sliding card holder is attached to a small wheel that glides over stereoscope extension. Handle can be detached. This object was used to view two nearly identical photographs, or stereographs, as one three dimensional image. The stereograph would be placed in the sliding card holder and adjusted to fit the user's vision until the two image overlapped to mimic a three-dimensional effect.

Item is a wooden hand held stereoscope with expandable slide viewer. Hood is wooden with binocular styled eye holes. Handle is removable. This object was used to view two nearly identical photographs, or stereographs, as one three dimensional image. The stereograph would be placed in the sliding card holder and adjusted to fit the user's vision until the two image overlapped to mimic a three-dimensional effect.

Written on object : Pat'd April 23.89.

This item is a revolving stereoscope in the shape of an orb. Item comes in a circle wooden case, two knobs that switch stereographs and a metal belt designed to hold stereographs. Wooden viewer is adjustable to user's vision. This item was intended to be a parlour ornament and contains 122 stereographs of landscapes, portraits and landmarks all sized 8 by 12 inches. Inside cover is a label explaining how to use this stereoscope from manufacturer.

Item is an olive electric View Master Projector manufactured by GAF Corporation. The slot on top of the projector is designed to insert reels into the projector. Pushing down the lever on the side of the projector will rotate the reel one frame at a time. Item is meant to project reel images on flat white screen. Written on object : 30 Watt Max. Item comes with a electrical cord.

This item is a handheld wooden Holmes style stereoscope. The viewer hood is lined with red velvet. Slide holder is adjustable and handle bends back onto viewer. This object was used to view two nearly identical photographs, or stereographs, as one three dimensional image. The stereograph would be placed in the sliding card holder and adjusted to fit the user's vision until the two images overlap to mimic a three-dimensional effect.

Written on object : The Saturnscope James M. Davis SI. Washington Place, N.Y.U.S.A. Sole Agent Patented U.S.A. Oct.15. 1895., Canada FebY.1. 1896. France B.S.G.D.G. France Britain Germany Austria and Belgium.

Item is a hand held wooden stereoscope manufactured by Underwood & Underwood. Viewer hood is made of aluminium, lined with velvet and adorned with floral engravings. Handle folds back onto viewer and card slider can be adjusted. Written on top of item : Sun Sculpture U&U trademark. This object was used to view two nearly identical photographs, or stereographs, as one three dimensional image. The stereograph would be placed in the sliding card holder and adjusted to fit the user's vision until the two images have overlapped to mimic a three-dimensional effect.

Written on handle : Man'f'd by Underwood & Underwood, New York, June 11, 1901, Foreign Patent Applied For. Written on Hood : BASS.

Item is a Holmes style handheld wooden stereoscope with metal hood, adjustable card slide and handle. Metal hood has an orange and black stripped design and lined with fabric. This object was used to view two nearly identical photographs, or stereographs, as one three dimensional image. The stereograph would be placed in the sliding card holder and adjusted to fit the user's vision until the two images overlap to mimic a three-dimensional effect.

Item is a Holmes style handheld wooden stereoscope with cardboard hood, adjustable card slide and handle. Handle is detachable. This object was used to view two nearly identical photographs, or stereographs, as one three dimensional image. The stereograph would be placed in the sliding card holder and adjusted to fit the user's vision until the two images overlap to mimic a three-dimensional effect. Written on object : American Lens Trademark Stereoscope. A clenched fist is branded into the top of the card slide holder.

Item is a green wood and plastic Correct-Eye-Scope used for vision testing and vision therapy. Item comes with a green wooden base and metal plates designed to hold Correct-Eye-Graphs or stereoscopic like drawings manufactured by Keystone Viewing Company to improve or test vision. A correct-Eye-Graph template would be placed in the sliding card holder, next the user would view the template through the stereoscope and attempt to trace the image displayed. This item comes with two booklets; one booklet designed for the left eye and one booklet designed for the right eye. Booklets are marked as such. Booklets also contain user instructions. The stereoscope is made from a wooden base with metal hooded eye holder similar to the design of a Homles stereoscope.

This item is a handheld stereoscope with binocular lenses made from wood and brass. This object was used to view two nearly identical photographs, or stereographs, as one three dimensional image. First, the stereograph would be placed in the sliding card holder, next the two images would merge together to mimic a three-dimensional photograph. Object comes with one 35 mm black and white film transparency of doctors and nurses assisting injured people off a Red Cross train at a train station.

This item is a handheld stereoscope made of wood and plastic. This object was used to view two nearly identical photographs, or stereographs, as one three dimensional image. The stereograph would be placed in the card holder, next binocular like lenses would be adjusted with a knob to fit the user's vision. This merges the two images together mimic a three-dimensional effect. A flap hood on the top of viewer is designed to allow light to illuminate stereograph. The hood comes with a mirror. Object comes with one glass plate stereograph of men and women in Victorian clothing sightseeing at a waterfall edge.

Item is a wooden box with a built in compact collapsible stereoscope viewer and card slide holder. This object was used to view two nearly identical photographs, or stereographs, as one three dimensional image. The stereograph would be placed in the sliding card holder and adjusted to fit the user's vision until the two images overlap to mimic a three-dimensional effect.

Item is a Kromskop viewer developed by Frederic E. Ives in 1895. Item comes with 1 monochrome transparency made from 3 colour separation negatives layered together; these transparencies were often referred to as kromograms. Kromograms were known as early examples of colour photography available as both mono and stereo images. A glass monoschrome plate is placed on top of object, when viewed through glass eye holes the image is overlapped with three kromograms making the stereograph appear three-dimensional and coloured. It is built in a staircase-shaped box with two eyeholes on the front. The articulated base allows the viewer to be properly oriented with light. At the back of the object is a tilting mirror. The mirror is designed to redirect light into the virtual window above. Lighting can be controlled so that the colour will not be distorted and take on a dominate colour.

This item is a promotional stereoscopic kit given out by Chevrolet General Motors photography to display interiors and exteriors of their new car line. Each image is titled with the car name. The 3D viewer is black and made from metal and plastic. The viewer comes with a built-in light that requires C batteries. Stereoscopic cards are placed through the slot in the bottom of the stereoscope, next the image would be viewed through the viewer. Lens can be adjusted by the metal knobs on the side to correct vision. A push-down button on the body of the viewer turns on a small internal light bulb which brightens the stereoscopic transparencies. This makes the image easier to see. Box of kit is made from cardboard and leather with snap buttons to open and close. Slots within the box divide and house viewer and stereographs.

Item is a brown binocular style plastic stereoscopic viewer accompanied by a colour transparency card depicting Llamas from South America. The 3D viewer was used to view two nearly identical photographs, or stereographs, as one three dimensional image. The stereograph would be placed in the card holder then viewed through the lens. The binocular effect would cause the two images to overlap and mimic a three-dimensional effect. Written on the card is are llama facts. This card is apart of a Zoo themed series.

Item is a beige plastic Model G View-Master manufactured by Sawyer's Inc. the 3D viewer includes original packaging, a GAF View-Master Stereo Viewer box nearly identical to the Sawyer's version of the viewer. The lever on the side of the viewer will rotate the reel one frame at a time once pressed. First, reels are inserted through the top of the viewer. Next, user would look through binocular eye holes to see a three dimensional image. View-Master can be used with ambient light. This item comes with a promotional reel depicting different reel themes available for purchase through Sawyer's Inc. Reel is made of 7 diametrical, 16 mm colour transparencies. In the mid-1960's Sawyer's was acquired as a subsidiary by GAF. This may explain why the packaging and object were nearly identical but branded differently.

Item is a over/under print viewer manufactured by Viewmagic to view physical or digital born images as three-dimensional objects. The 3D viewer converts 4 x 6 inch prints, which is a not a suitable format size for stereoscopes, into functioning stereographic images. Prisms in the item direct right eye vision upwards and left eye vision down. By swaying forward and back the two images begin to fuse together to mimic a three-dimensional image. Item comes in original unopned package and instruction manuals. Written on object : View Magic Dimension Press Harvard. MA 10451-0083 Made in U.S.A.