Item is a twin lens DX programmed camera that with the release of the flash gun creates exposure to the lens and the viewfinder. It has a fixed-focus 34mm lens and an autofocus 60mm lens. The flash can be used as manual or automatic, and there is a motor for winding the film. Uses a 9 volt lithium battery pack.

Item is a Cine-Kodak Model B, the follow-up model of the Cine-Kodak which was the first 16mm camera. It has a cast aluminum body, hand crank and spring motor. The use of a tripod was required to allow varying speeds and single frames to be taken.

Introduced by Kodak in 1971, XL (eXisting Light) was incorporated with Super 8 to use their new High Speed Ektachrome Super 8 colour film and was designed to be able to film in as low light conditions as possible. The lens aperture is F1.2 compared to the super 8 normal of F1.8 and the film intermittent mechanism film pulldown speed was increased to allow a shutter open angle of 230 degrees compared to a typical 160 degrees previously. No light was diverted away from the film for a reflex viewfinder or TTL metering. The Kodak XL cameras had a unique "binocular" shape allowing easy two handed shooting.

Item is a Kodak Panoram No. 4, model D. It is a large box camera in black leather casing that features a swivel lens that rotates as the camera box remains stationary to make a panoramic exposure of up to approximately 110 degrees.

Item is a Kodak Premoette Junior Special Camera. Small sized camera, black leather casing and red leather bellows. Metal clasps.

Item is a No. 1A Folding Pocket Camera Model C. It is a medium sized camera with black leather casing and red leather bellows.

Item consists of a Kodak Instand Color film pack with 10 pictures, sealed in original packaging.

Item consists of a a roll of 100 feet of 16 mm Kodak Fine Grain Positive safety film in original packaging.

Item consists of a 15 exposure roll of Kodachrome II color film for color slides in original packaging. Develop before date is February 1975.

Item consists of an 8 exposure roll of Kodacolor film for color prints C116 in original packaging. Develop before date is June 1985.

Item consists of a cylindrical metal Kodak film processing tank with a 6cm metal reel and with plastic separation sheet.

Item is a Kodak T-14 control scale reference strip, produced by Eastman Kodak Comapny, designed to help calculate and monitor the exposing and processing of photographs. In printed envelope.

Item is an auto-release shutter mechanism for still cameras, which allowed one to take self pictures. By hooking the shoulder of the cable shutter release from the camera into the extended spring clip, an additional 10 second period was available to take the picture after pushing up the release lever. Instructions are attached.

Item is a Graphic Film Pack Adapter for a large 4 x 5 plate camera.

Item is a wooden Plate holder for 4 x 5 plates - contains 2 undeveloped glass plates.

Dedicated shoe for Yashice Contax cameras.

Plastic flash holder to be attached on Kodak Brownie Cameras - Unusual 22.5 volt battery and sync cable

Item consists of a Kodak Floasholder Extension Unit Model B. It is in its original packaging, containing flash holder, clamp, plastic guard, and two 2-way flashguard envelopes.

Item is a Kodalite Flasholder for use with Kodak film.

Item consists of a red Kodak Timer.

Item consists of two darkroom lights. Each has a wooden base holding a metal cylinder that surrounds a darkroom bulb. The power cord is thread through the wooden base to connect to the bulb. Only one still has a bulb. The inside of both metal cylinders has been painted white.

Item consists of a Kodak Complete Outfit of Transparent Oil Colours kit, including oil paints, Instructions for Using Kodak Transparent Oil Colors, and How to Use The Complete Outfit of Kodak Transparent Oil Colors, with a glass palette and application tools in a wooden case. They could be used for coloring contact prints and enlargements.

Item consists of a Kodaslide Projector Model 1A. The item is an improved model of the Kodaslide Projector (produced 1937-1940), the first Kodak slide projector to project 50 x 50 mm glass-mounted transparency slides. Along with improvements made by the Kodaslide Projector Model 1 (produced 1939 to 1947), the first model to accept Kodachrome transparencies in Kodaslide Ready-Mount, the Kodaslide Projector Model 1A provided a sharper, brighter projection and featured a 150-watt lamp, a 4-inch Kodak Projection Ektanon f3.5 Luminized Lens, and single-element heat-absorbing glass as an added measure to help protect the transparency slides during projection.

Item consists of a Kodascope Eight Model 70 8mm motion picture film projector. On the reverse, the projector has a dial for slower to faster projection, and a switch with options Off, Motor and Lamp. It has a grey metal body, and is for use with slow burning film only. On the front of the projector is a threading knob. It has a 1 inch f/1.6 lens.

Item consists of a Kodaslide Table Viewer 4x. It allows for a lamp that uses a maximum of 50 watts. Is used for viewing 35mm slides.

Kodak Modular Video System with MVS 8 mm Audio-Video Recorder, Stereo Tuner-Timer MVS-380, and User's Guide and remote control.

Item is a Kodak DP1100 Digital projector with case, cables, remote control and CD reference manual. Used.

Item is a Kodak Li-on Battery Charger unopened in original packaging with battery and adaptors for 6 international power plugs.

Item is a handheld plastic view master containing a reel of 7 diametrical, 16 mm colour transparencies of Old Covered Bridges, New England. It was manufactured by GAF, Corporation in Portland, Oregon, USA. The lever on the side of the viewer will rotate the reel one frame at a time once pressed. Item is made of plastic and metal. Reels are interchangeable and come with a variety of themes.