Lenses for various motion-picture cameras and projectors.
Eumig Wien Eumakro 2x, super 8 lens Eumig Eumicron 0.5x, super 8 lens Eumig Eumacronar 0.5x lens Cosmicar TV 16mm Lens Cosmicar television 50mm lens Tamron TV 16mm lens Computar TV 8,5 mm lens
Item is a lens for 4 x 5 in. exposures on sheet film Schneider-Kreuznach symmar f6.8/130 mm. lens, Compur-Synchro shutter 1-1/500 sec. Includes 2 other lenses: Scheider-Kreuznach symmar 1:5.6 135 mm, and the other is 1:5.6 240mm. Both have Compur shutters. This camera is considered to be the ultimate for architecture and technical photography. It is still on the market and still used by professionals.
Item is to be used for duplication of 35mm slides or film strips. The bellows are folded into the adapter unit and is kept in place out of sight with a magnet to protect it from damage. Manufactured by Century Optics.
Item is to be used for duplication of 35mm slides or film strips. The bellows are folded into the adapter unit and is kept in place out of sight with a magnet to protect it from damage.
Item is a wooden time shutter that could be mounted on any plate camera. Is still functional. The spring wound mechanism oerates a sil curtain to open and close.
Item is a Trifocal Viewfinder. The earliest Bolex model H motion picture cameras included this viewfinder which could be fitted at the top or on the side of the camera. The field of view is shown for lenses of 3 focal lengths. Field of view is changed by raising or lowering side levers which move magnifying prisms into place inside the viewer. When fitted to the side of the film door, the finder offers parallax correction by adjusting a dial which corresponds to the distance between the subject and lens. The H-16 version shows the angle of view for 15mm, 25mm and 75mm lenses; the H-8 version adjusts for 6.5, 12.5 and 35mm. A serial number is located on the rear of the viewfinder which, in most cases, matches the serial number of the camera to which it is attached.
These allow Polaroid Films to be used with professional 4X5 cameras of various manufacturers these holders would fit standard 4X% camera backs. They were often used for test shots
Item is a mechanical self timer that can be scewed into a cable release socket, providing variable delay in tripping of shutter. Timer comses with plastic case
Item is an extention cable that allows the operation of compatable camera shutters without danger of the camera shaking when the shutter is released. Attachment fits standard shutter release mechanisms.
Item is a mechanical shutter with pneumatic operation, includes bulb and tubing. The Packard-Ideal shutter is used behind the lens in large-format view cameras.
Item is to be used with the Model PB-4 Bellows for duplication of 35mm slides or film strips. The bellows are folded into the adapter unit and is kept in place out of sight with a magnet to protect it from damage. The PS-4 can also be used with the PB-5 bellows.
