Item consists of a paper sleeve containing "(Nitrate) One Kodaloid Printing Mask" for 1 5/8 x 2 1/2 inch film negatives.

Collection includes flashcubes for instamatic cameras.
Flashcube
Magicube
FlipFlash

Item consists of two 16mm magazines loaded with Kodak film.

Item consists of two darkroom lights. Each has a wooden base holding a metal cylinder that surrounds a darkroom bulb. The power cord is thread through the wooden base to connect to the bulb. Only one still has a bulb. The inside of both metal cylinders has been painted white.

Item consists of a 2MB Kodak Picture Card. It could be used to store and share digital pictures. Works with standard CompactFlash ATA compatible digital cameras. In original packaging.

Item is a box containing a brownie darkroom lamp, 3 developing trays, 2 Tri-Chem packs, 4 oz graduate measuring cup, etc.

Item is a brown glass bottle formally containing five pounds of acetic acid for photographic development. Manufactured by the Canadian Kodak Company, Ltd.

Item is a manual plate changing box-style camera. It holds 12 steel plateholders inside the top door compartment behind the plane of focus. Holders have to be manually inserted into a slot. The camera has an achromatic lens with three diaphragm stops, two viewfinders, an aperture scale from f16 to 45, and a time and instantaneous shutter.

Item is a roll of film in plastic casing, designed to be used as a camera. The camera comes in its original packaging, opened. ASA 100.

Item consists of an Analite Enlarger Exposure Computer & Negative Analyzer. It is still in it's original packaging with manuals.

Item is an Ansco Cadet 127 roll film camera. The design of this camera was made to compete with the Kodak Brownie Star series, including similar three-point flash contacts. The camera features an Anscar Lens and a dial to switch between black and white and colour. The body is black plastic.

Item is an Ansco Cadet 127 roll film camera with flash unit. The design of this camera was made to compete with the Kodak Brownie Star series, including similar three-point flash contacts. The camera features an Anscar Lens and a dial to switch between black and white and colour. The body is black plastic.

Item consists of an Argus Argoflex E twin-lens reflex camera made in the U.S.A. It was the first 620 film TLR camera produced by Argus. The camera features gear-coupled lenses allowing the user to focus using the viewfinder, an f4.5/75mm Argus Varex Anastigmat lens, and an Argus Varex Shutter with speeds T, B, 200, 100, 50, 25 and 10. Exposures are 6x6. The body is made of black Bakelite.

Item is a 35mm camera. Very solid and durable design, similar to the box camera.

Small grey metal splicer for cutting and rejoining 8 mm film strips for at-home editing. Remnants of film strips were found in the splicer along with a crumpled piece of paper with instructions for use.

Item consists of a single lens reflex Auto Graflex camera for 3.25 x 4.25" plates or film sheets. It has a disappearing Bausch & Lomb 166mm f/4.5 lens, a collapsible viewing hood and a cloth curtain New Simplified Focal Plane Shutter with speeds up to 1/1000 sec. It was made by the Folmer & Schwing Division of the Eastman Kodak Company, in Rochester, New York from 1907-1923. Two other models of the same camera were made and sold at the same time, one for 4x5" plates and one for 5x7" plates.

Item consists of a Bell & Howell 240 motion picture camera. It is in a hard leather case also containing the manual and the case key. The camera uses 16mm film, has automatic exposure control, a 20mm lens, a self threading mechanism, has 32-fott film run and rapid winding crank, a reserve power indicator, and accepts a cable release.

Item consists of a Bell & Howell Filmo Auto Load 16mm motion picture magazine camera.

Item consists of a Bell & Howell Two Fifty Two motion picture camera. It takes 8mm film, and has a Bell & Howell Super-Comat 10mm f/2.3 lens. There is a dial on the front of the camera to select aperture, light settings, and black & white or colour. It has a two-toned brown body and a winding knob on the side.

Item is a compact 35mm camera with coupled rangefinder and an Anastigmat F3.2/44 mm lens in a helical mount. It has a double exposure prevention mechanism.

Item had a manufacturer batch number of RL743J91923B.

Item consists of a Kodak Movie Camera Eight mm. It has a 13mm f/1.9 lens and retailed for $49.50.

Item consists of a Kodak Brownie Automatic Movie Camera f/2.3. It is an 8mm wind-up spool-film camera. It has a flip-up bombsite viewfinder, an f/2.3 lens with a photocell, and originally retailed for $74.50.

Item consists of a Kodak Brownie Bullet Camera. It is an eyelevel 127 roll film camera that was modeled as an upscale version of the Brownie Holiday. Other cameras with identical designs but different names include the Brownie Chiquita Camera and the Camera Brownie Chiquita. It is made of Bakelite, and has a Dakon lens and a rotary shutter. In original card box with manual.

Item consists of a Kodak Movie Camera Eight mm. It has a 13mm f/2.7 lens and retailed for $47.50.

Item consists of a Kodak Movie Camera Turret f/1.9. It is a motion picture camera for double run 8mm film with 25 feet load, made in Canada. The three lenses are on a rotating turret offering 13mm, 24mm, and 9mm wide angle options.

Item consists of a Kodak Brownie Camera f/`9 model 3. It has a 13mm, f/1.9 lens and originally retailed for $44.50.

Item is Brownie No. 2 Model F box camera that used 120 film to make pictures 5.7 x 8.25 cm in size. It has a leatherette covered aluminum body and a simple lens with 3 aperture settings and a rotary shutter.

Item consists of a Kodak No. 2-A Brownie Model B box roll film camera. It used size 116 film and made a picture 6.4x10.8cm. The camera has a leatherette covered card body, a metal film carrier, and two reflecting finders. Case can be removed for loading by releasing 2 pivoted catches and pulling out the winding key. Patented by Eastman Kodak Company in Rochester, New York and manufactured by the Canadian Kodak Company Limited in Toronto, Ontario.

Item consists of a Kodak No. 2-C Brownie Model A box camera. The camera used 130 roll film for an image size of 5.715 x 10.795 cm. It has a standard Meniscus achromatic lens and a rotary shutter.

Item is a small Bakelite camera for 127 roll film. Designed to mimic the look of a twin lens camera, the topmost "lens" is in fact a brilliant viewfinder and cannot be used for focusing, it is a simple box camera design.

Item consists of a red Kodak Brownie StarFlash camera. It was manufactured by the Canadian Kodak Co., Limited in Toronto Ontario, and produces 4x4cm images on 127 film. It has a plastic body and built in flash.

Item consists of a Kodak Brownie Super 27 viewfinder camera. The camera uses 127 roll film, has a Kodar f/8 lens with two stops, sunny, f/13.5 and cl'dy br't/flash f/8. A knob on the front of the lens allows for a choice of focus zones, close-up or beyond 6ft. The choice between two shutter speeds is made by opening the flash door, for a speed of 1/40, or closing it for a speed of 1/80. The body is moulded plastic featuring an optical direct vision finder and a flash gun for AG1 bulbs, concealed by a door beside the lens.

Item consists of a Brownie Target Six-16 box roll film camera that used film sized 616 to make pictures sized 6.35 x 10.8 cm. It was made in Canada, and has a simple meniscus lens and a rotary shutter. The body is a metal box covered in black leatherette with two brilliant finders, and a vertical art-deco line design on the front panel.

Item is a mass produced Bakelite camera for 127 film format, designed for Kodak by Walter Dorwin Teague. Simple lens on helical extension tube, only one shutter speed. Collapsible frame viewfinder on top of camera. Red film counter window on back.

File contains two identical photographs featuring an image of a group of employees standing with a Canada flag outside in the parking lot of Building #5. A flag in the foreground indicates the 125th Anniversary of the Confederation of Canada. The third photograph features an image of the Kodak PhotoCD compact disc with PhotoCD Player and remote, likely taken for advertising purposes.

Item is the rangefinder model of the Canonet 28. It has a CDS (cadmium sulphide) cell above the lens which is a Canon F2.8 40 mm. It has a Canonlite D flash attached to the hot shoe mount.

Item consists of a Cine-Kodak Combination case. Included inside the leather case are the Cine-Kodak Magazine 8 motion picture camera, several lenses, lens hood, filters, incident light attachment, case key and camera manual. It is a clockwork-driven camera that could run at 16, 26, 32 and 64 frames per second. It is fitted with an interchangeable lens.

Item consists of a Cine-Kodak Duo Spicer Outfit complete with film cement, containers, an envelope of mounting screws and strips of practice film, and splicer. Missing applicators. For 8mm and 16mm movies, buth sound and silent.

Item consists of a Cine-Kodak Eight Model 20 motion picture camera. It was the first camera produced to use 8mm film. It is a simple, spool loading camera, powered by clockwork with a spring motor. It has a Kodak Anastigmat 13mm, f3.5 fixed focus lens, a newton finder in the handle, and runs at 16fps. The body is metal covered with black leather.

Item is black leather covered metal body video camera with a Newton finder in the handle. The object uses a spring motor at 16 fps and has a Kodak Anastigmat 13mm lens with a fixed focus f2.7.

Item consists of a Cine-Kodak Eight Model 60. One of the first movie cameras made by Kodak for 8mm film, it provided a cheap and portable option for home-movie makers compared to 16mm film.

Item consists of an empty carton for 50 feet of 16 mm Cine-Kodak High Speed Super-XX Panchromatic Safety Film. Develop before date is stamped May 17 1948. Inscribed in pencil on the verso reads: "Parts for Baincs-McDowall / Enlarger".

Item consists of a Cine-Kodak Magazine 16 motion picture camera. It used 16mm film and was Kodak's first personal movie camera. It has a Kodak Anastigmat f:1.9 25mm lens and can film at 16, 32 or 64 fps. It winds with a fold down crank. The body is metal covered with black leather.

Item consists of a Cine-Kodak Magazine 8 Camera. It was introduced in the United States in 1946 and manufactured until 1955. It is a clockwork-driven camera capable of running at 16, 26, 32 and 64 frames per second. It has a Kodak Cine Ektanon Lens 13mm f/1.9. The lens is interchangeable and the wheel at the top of the camera is used to alter the viewfinder image according to the focal length. On the side is a universal guide for different types of daylight. It is in a hard brown case with filters, a second lens, a manual, purchase receipts and an adaptor ring.

Item consists of a Cine-Kodak Model B. It is the follow-up model to the Cine-Kodak, the first 16mm camera. As opposed to the Cine-Kodak, the motor Cine-Kodak Model B is spring-driven rather than hand-cranked, which allowed for it to be used without a tripod. It has an f/3.5 20mm lens and a Newton finder. It has a portrait attachment for close ups from 2 to 5 feet.

Item consists of a Cine-Kodak Model B 16mm motion picture camera. It was the follow-up to the Cine-Kodak, the world's first 16mm movie camera, featuring a spring motor. The body is an aluminum box covered in black leatherette.

Item consists of a Cine-Kodak Model B 16mm motion picture camera. It was the follow-up to the Cine-Kodak, the world's first 16mm movie camera, featuring a spring motor. The body is an aluminum box covered in black leatherette. In hard case with manual , 2 lens adaptor rings, an exposure guide, and 4 mini Kodak film guides.

File consists of transparencies featuring images of the Kodak Create-a-Print system, a self-operated enlargement centre for 35 mm negatives, located at the Blackwell Image Centre and Alt Camera.

File consists of 6 contact sheets and 3 prints of the Kodak Create-a-Print system, a self-operated enlargement centre for 35 mm negatives, located at the Blackwell Image Centre and Alt Camera.

File consists of colour prints featuring images of employees demonstrating the Kodak Create-a-Print system, a self-operated enlargement centre for 35 mm negatives, located at the building 4 Image Centre

Item consists of a brick-shaped brown plastic camera. It creates 40 24 x 32 mm exposures on 35 mm film in special cassttes. The camera uses a Graf Anastigmat f7/7/40 mm lens with a single-speed shutter that trips by counterclockwise motion on the winding crank.

Item consists of 1 exposed disc negative film for colour photographic prints.

Item consists of a Kodak Duaflex I camera and a Kodak Duaflex flash-holder. Camera is black and silver with a Kodet lens. Uses 620 film. Tripod mount. Made in Toronto. 620 roll film pseudo twin-lens reflex. Flash-holder imported by the Canadian Kodak Co. Ltd. Toronto, for use with early Duaflex models I and II. Synchronized for SM and SF bulbs when the camera was set on "I". No. 5 and No. 25 bulbs could be used with the "B" setting.

Item consists of an empty box for Eastman Films. Inscribed in pencil on lid reads: "Number 57 to 83 / September 15 to Nov 20 / /94".

Item consists of a narrow and tall Eastman Plate Tank, used in processing glass plate negatives. It features an embossed timer on the front.

Item consists of a roll of Eastman Plus-X Reversal Safety Film for 16mm cameras in original packaging. It is in a black metal canister sealed with black fabric tape.

Item consists of an Eastman Studio Scale. It has a wooden base, a 6 piece weight set and a plaque that reads Avoirdupois Weight. It was used to facilitate the mixing of chemicals in a photographer's dark room.

Item is a contact printing frame, manufactured by Eastman Kodak Company.

Item is 2 package of photographic paper: Eastman Kodak paper, 2.25 x 3.25 size Solio Paper and Velvet velox developing paper. Both manufactured by Candian Kodak Co. Limited. Directions are missing from both packages.

Item consists of 2 rolls of Kodak Ektachrome ASA 160 Tungston sound movie film for cameras accepting the super 8 sound cartridge. It is a high speed film.

Item is a compact viewfinder camera with a built-in electronix flash, made for use with 110 cartridge film. Manufactured for the Canadian market, its nameplate reads: "appareil Kodak EKRALITE 500 camera". It features a hinged camera body that also serves as a camera grip. It has a Kodak Reomar 22mm kens and requires a 9 volt battery.

Various photograph envelopes from Kodak in Montreal QC, Gurds Sports Hobbies in London ON, and Tamblyn Tel-Vision Prints in Toronto. Advertisements for Verichrome Safety film on Kodak envelopes. One envelope contains two prints of A.T. Orr, one with him and a group of friends, the other holding game after hunting.

Item is a 48 gallon copper kettle with a silver-plated liner. It was installed in building #3 of the Kodak Heights plant in 1915 for making photographic emulsion for black and white paper and was used until 1974. The kettle was used to make the first photographic emulsion produced in Canada and was referred to as the "making kettle".

Item is a small novelty film camera that is disguised as a railroad pocket watch, first produced into early 1900's and sold until 1939. The exposure is made through the winding stem and the winding knob serves as a lens cap, and required special film cartridges. The camera is relatively common, as it was marketed for so long and several variations exist in the "Expo" trademark style, the winding knob, and the viewfinder shape. Black, red, blue enameled versions produced about 1935 are rarer.

Item is an extinction exposure meter for motion picture cameras.

Item consists of a Falcon Miniature made in New York by Utility Manufacturing Company. It is a 127 film camera with a half frame viewfinder and a black Bakelite body. It has a Wollensak Minivar 50mm lens with fixed aperture and fixed focus, a one speed (1/25 +B) rotary shutter, a simple optical viewfinder and a spare film compartment.

Item is a typical handheld camera using 5.7 inch roll film. The transport is by a built-in clockwork (one shot at a time) to be wound by a large lever at the left of the body to generate a flat film plane. Some suction is generated during exposure. Shutter is made by Ilex (Rochester NY) 1/125, 1/250, 1/500 sec.The lens is also by Ilex Optical Co - Paragon Anasigmat f6.3. Accessories include 1 38mm Yellow Filter and 2 Metal Slides.

Item is a tube containing chemicals that were to be dissolved in water to develop prints for film and plates.

Item is a light-tight black bag used to load shot photoraphic film into processing tanks for developing.

Item is a set of 2 plate holders - one wood and one metal one FOTAC, the other Fidelity. Both 3.25 x 4.25.

Item is a set of 5 plate holders for 3.25 x 4.25 plate film cameras.

Item is a Graphic Film Pack Adapter for a large 4 x 5 plate camera.

1 empty box; 1 full. Different kinds.

Item consists of a pack of 12 Canadian General Electric AG-1B Flashbulbs.

Item consists of 2 boxes of GE, single use flash bulbs.

Item consists of a pack of 3 General Electric Super Cubes flashcubes for standard flashcube cameras.

Item is a selenium cell type light meter. Working condition, selinium cell is weak. Incident light attachement is missing

Item consists of 3 negative holders for 2 4x5 sheets of cut film.

Item consists of a Griswold Film Splicer Model R-3 from Jefferson, New York. The serial number is 7065. It was made by Neumade Products Corp., New York, N.Y. Factory, Buffalo N.Y. The body is made of cast iron. For 35mm film.

Item consists of a Kodak Hawkeye 8 Movie Camera. The camera was patented by Eastman Kodak Company in Rochester, and was made by Canadian Kodak Co. Limited. It has a Kodak Ektanar Lens 13m f/2.3 and is made of plastic. It used 8mm film and was sold for 19.99 when released in 1963.

Item is a simple, red, Bakelite camera for 6 x 6 cm (2.36" x 2.36") exposures on 620 film. The design includes a fixed focus, single aperture and one shutter speed. There are connection points for a flash unit, and a dimpled metal plate on the front, perhaps intended to mimic the apperance of a selenium light meter.

Item is a simple, grey Bakelite camera for 6 x 6 cm (2.36" x 2.36") exposures on 620 film. The design includes a fixed focus, single aperture and one shutter speed. There are connection points for a flash unit, and a dimpled metal plate on the front, perhaps intended to mimic the apperance of a selenium light meter.

Item consists of a Kodak Instamatic M5 Movie Camera.

Item is a Vest Pocket strut camera for 4.5 x 6cm exposures on 127 roll film. Strut cameras differed from other folding cameras in that the lens remained exposed or uncovered when the camera was folded down. This model has a Bakelite body.

Mckoewn Pg 505

Item consists of a 24 exposure roll of 35 mm Kodachrome 200 High Speed Film for Color Slides in original packaging. Develop before date is February 1995.

Item consists of a 15 metre Super 8 cartridge of Kodachrome 40 Colour Movie Film Type A in original packaging. Develop before date is August 1987.

Item consists of 2 rolld of Kodachrome 40 sound color movie film, Super 8, Type A.

Item consists of 1 unopened, 64 iso, 35 mm colour transparency film roll for photographic slides.

Item consists of a 20 exposure roll of Kodachrome 64 Color Film for Color Slides KR 110-20P in original packaging. Develop before date is February 1979.